Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter in the Nissan Juke?

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, see how to replace the fuel filter in the Nissan Juke, a simple operation but one that requires disassembling many components. First, ensure the engine is completely cold, then open the bonnet and remove both the wipers and the plastic cover underneath them.

Proceed by removing the wiper mechanism, take off the additional plastic cover, and disconnect the hoses connected to the old filter. Finally, remove the old filter by unscrewing the relevant bolts, insert the replacement, and reassemble everything by following the reverse procedure.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in the Nissan Juke
How to Replace the Diesel Filter in the Nissan Juke
Nissan Juke (2010-2019 / MK 1) In today's video, you will see how to independently replace the diesel filter in the Nissan Juke 1.5 dCi. First, allow the vehicle to cool down, then…
How to Replace the Diesel Filter on the Nissan Juke 1.5 DCI
How to Replace the Diesel Filter on the Nissan Juke 1.5 DCI
Nissan Juke (2010-2019 / MK 1) The main steps today will show you how to remove and replace the diesel filter on the Nissan Juke 1.5 DCI. First, open the bonnet of the vehicle and …
How to Replace the Diesel Filter on a Nissan Juke
How to Replace the Diesel Filter on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the diesel filter on a Nissan Juke, open the bonnet to access the components underneath. At the rear, just below the windscreen, you will …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos