Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter on a 2016 Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel filter

See other generations:
Video tutorial

Replacing the fuel filter on a 2016 Nissan Juke is a fairly complex operation because in order to replace the filter, you also need to replace the pump since the module is unique. We start the replacement by opening the hood and disconnecting the battery.

Immediately after, we open the fuel tank cap and remove the rear seats in order to access the pump module, which you will need to unscrew with a Philips key. After removing the cover, you will need to disconnect the connector and the tube. Using a key, unscrew the nut and remove the pump.

Insert the new pump and close everything up. Insert the filter and close the fuel tank. Start the vehicle and run the engine for a few minutes.

Then, reassemble the removed parts and close the hood.


Posted on 25 February 2025 by ScegliAuto


Related tutorials

How to replace the diesel filter of the 2015 Nissan Juke
How to replace the diesel filter of the 2015 Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today we will explain how to replace the diesel filter of the 2015 Nissan Juke. We open the front hood of the car and remove the plastic undertray ab…
Replacing the Air Filter on the Nissan Juke
Replacing the Air Filter on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) In this video tutorial, you will learn how to remove and replace the engine air filter on the first generation Nissan Juke with a 1.5 DCI engine; the…
How to replace the cabin air filter of the Nissan Juke
How to replace the cabin air filter of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Below we will see the instructions for replacing the cabin air filter or pollen filter of the Nissan Juke. First, we get on board the car and start b…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos