Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Nissan Juke remote control

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Today we will explain how to replace the battery of the remote control of a 2013 Nissan Juke car. To perform this operation, we will need to use a Phillips screwdriver N 3 and a flathead screwdriver. Unscrew the screw located at the base of the remote control corresponding to the metal key, after unscrewing the screw, open the remote control using the flathead screwdriver, remove the battery and insert the new one. Close the remote control and screw the locking screw.

All that's left is to go in front of the vehicle to test the remote control operation by pressing the open and close buttons; if it does not work, reprogramming of the key may be necessary.


Posted on 17 February 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Nissan Juke remote control.
How to replace the battery of the Nissan Juke remote control.
Nissan Juke (2010-2019 / MK 1) To replace the battery in a remote control for a Nissan Juke, we need to slide the button located on the back of the remote and remove the top part c…
How to Replace the Remote Battery of the Nissan Juke
How to Replace the Remote Battery of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the battery of the Nissan Juke remote is a simple and quick task you can do yourself. To replace the battery, press the button located behi…
How to Replace the Remote Control Battery of the Nissan Juke?
How to Replace the Remote Control Battery of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the remote control battery of the Nissan Juke, use a small screwdriver to lower the switch on the back of the remote, allowing the key to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos