Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace rear light bulbs on Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Rear light bulb
Operation: How to replace rear light bulbs on Nissan Qashqai

Let's see in this video how to replace the bulbs on the rear reversing light of a Nissan Qashqai (tailgate side). To begin with: we open the tailgate of the car, then, with a screwdriver, unscrew the screws placed on the plastic cover of the tailgate. We detach the plastic covering from the tailgate, extract the lamp holders present in the tailgate (install the new bulbs). After this operation we go to disassemble the rear light (left side), disconnect the lamp holders and replace the damaged bulbs. Finally we test the correct functioning of the mounted lights.


Posted on 20 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - Why is the reverse light on my Nissan Qashqai not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos