Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Control Unit on Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Warning light – error code

How to reset the airbag control unit on a Nissan Qashqai and don’t know how to do it? Follow these steps: open the car door, sit in the driver’s seat, and you will see a socket under the dashboard (beneath the steering wheel) where you can connect your tester. Connect the mini computer to the connector and perform a system check of the car. After all necessary checks to reset the car’s maintenance light, disconnect the mini computer cable from the previously connected socket after the reset.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2021-2026 / J12) In the latest version of the Nissan Qashqai, the passenger airbag management system is very convenient, and to confirm this, here’s a video explainin…
Nissan Qashqai (2014-2022 / J11) Before you begin, enter the cabin of your Nissan Qashqai, specifically the driver's seat. Start by inserting the key into the ignition barrel and tur…
Nissan Qashqai (2006-2014 / J10) Today's instructions will allow us to reset the airbag malfunction warning light on the Nissan Qashqai in a few simple steps. First, it is necessary …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - What does the Nissan Qashqai engine warning light come on? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos