Do it yourself
Frequently asked questions about cars and motorcycles

Removal of Car Radio and Centre Console

Model: Nissan Pathfinder MK 3, R51 - Years 2005-2012
Part: Car stereo

The first step is to remove the plastic cover of the glove compartment located on the centre tunnel, just behind the gear lever: simply pull and detach it.
Next, use a plastic lever to detach the cover of the centre console (if necessary, move the gear lever to facilitate the extraction process) disconnecting the connectors attached to the controls present.
At this point, detach the plastic glove compartment located in the centre of the dashboard, just above the car radio, and remove the securing screws present.
Then detach the central part of the console (the part around the car radio that contains the two side air vents and the climate control buttons) and rest it on the centre tunnel (protecting it with a cloth).
Now unscrew the 4 securing screws of the car radio support and extract it from its housing.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Pathfinder (2005-2012 / MK 3, R51) The first step is to remove the glove compartment located at the centre of the dashboard, just above the central console: simply pry along the edges.…
Nissan Pathfinder (2005-2012 / MK 3, R51) Below we will see the instructions that will allow us to disassemble and replace the console and the center tunnel of the Nissan Pathfinder. First, w…
Nissan Pathfinder (1986-1995 / MK 1, Wd21) To replace the rear brake shoes, loosen the wheel nuts before lifting the vehicle; then place the jack under the differential and position the car on…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos