Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to remove the window control panel on a Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Window lift button
Operation: How to remove the window control panel on a Nissan Micra

How to disassemble the power window control panel with the panel on a Nissan Micra? Before starting the disassembly work, let's disconnect the battery terminals located in the front engine compartment. With a lever or screwdriver we go to leverage the handle on the door panel, detach it and disconnect the window control panel. With a fixed screwdriver we unscrew the screws on the panel, with the plastic lever we release all the clips by levering around the entire perimeter of the door. Finally, we pull off the panel with our hands, (we unhook the cable of the opening lever, the clamps of the window lifters and the speakers).


Posted on 3 November 2023 by ScegliAuto



How to remove the door panel on Nissan Micra
Nissan Micra (1992-2002 / K11) How to remove the door panel (right side) on a Nissan Micra? With a lever or screwdriver we go to leverage the handle on the door panel, detach it an
How do I remove the Nissan Micra door panel?
Nissan Micra (2010-2017 / K13) In order to remove the Nissan Micra door panel, you need to unscrew the bolt located next to the window control panel, so that the entire cover can b
Remove the door on Nissan Micra
Nissan Micra (2002-2010 / K12) Remove the door from the door of a Micra? We remove the door panel if we want to intervene in the door or simply replace it. We lever the handle on t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos