|
Do it yourself
| |||
| ||||
How to Change Oil and Filter on a Nissan Note 2014
Model: Nissan Note
MK 2, E12
- Years 2012-2022
In this video, we can see how to change the engine oil and filter on a Nissan Note: you will need good quality SAE 5W30 oil, a new oil filter, a socket wrench, and a large container to hold the used oil (which we will then dispose of properly at an authorised centre). Block the rear wheels and lift the car. Position the container under the drain plug and let the oil drain out. To speed up the process, it is good practice to open the oil cap in the engine bay. The filter is hand-tightened: if it is too tight, use a screwdriver and a hammer to puncture it and use it as a lever. Install a new filter after lubricating the seal with new oil. Put a new drain plug in the sump and add new engine oil: first, about 90% of the required amount, then fill the filter by briefly starting the engine and check again with the dipstick: adjust the amount until it is just below the "max" mark on the dipstick.
Posted on 13 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Note
(2004-2013 /
E11, MK 1)
Before starting, open the bonnet of your Nissan Note. Begin by unclipping and removing the rear cover of the fire wall. This will give you access to …
Nissan Note
(2004-2013 /
E11, MK 1)
Here’s how to remove the diesel filter on a Nissan Note. Lift the car on a column lift (jack), and locate the diesel filter. Remove the plastic cover…
Nissan Note
(2004-2013 /
E11, MK 1)
Replacing the oil filter and engine oil of the 2010 Nissan Note is a simple and quick operation to be carried out independently. Before starting with…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.250
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |