Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to bleed the Nissan Qashqai J10 diesel filter

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Diesel filter
Operation: How to bleed the Nissan Qashqai J10 diesel filter

The bleeding operation of the diesel filter must be carried out when replacing the filter itself; to do this you have to open the bonnet, on the left side you will find the filter in a clearly visible position. Detach the diesel pipes (both suction and delivery), unscrew the fixing nuts of the metal cage and pull it out. With a 10 mm wrench you can unscrew the sealing band of the filter and extract it. Once the filter has been replaced with a new one, you can reconnect the diesel pipes and repeat the same operations in sequence to fix the metal cage in its place. To purge, proceed as follows: on the side of the filter you will find a black valve, open it, use the pipette to pump the diesel fuel and as soon as it comes out of the valve, you can close it again (the air will have come out completely from the filter).


Posted on 13 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the diesel filter in the Nissan Qashqai 1.5 DCI? Read Answer
    • Qashqai 2006-2014 - How much does the diesel filter cost in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why did the lamp showing an ampoule come on in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Diesel filter lease on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos