Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Cruise Control on the 2017 Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Onboard computer

The cruise control on the Nissan Juke allows you to set a desired speed between 25 and 89 mph and maintain it until you wish to slow down, accelerate, or stop. Press the ON/OFF switch to activate the cruise control. You can then drive the vehicle at the desired speed; once the set speed limit is reached, the cruise control light will start to flash. To change the previously set speed, press the button for a few seconds and adjust the speed using the "+" or "-" buttons. It is also possible to temporarily change the preset speed by fully pressing the accelerator pedal, allowing you to overtake safely despite the limit. To deactivate the system, press the ON/OFF button.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the language of the Nissan Juke's instrument panel
How to set the language of the Nissan Juke's instrument panel
Nissan Juke (2019-2026 / MK 2) Today we will explain how to set the language of the onboard computer and instrument cluster of the 2019 Nissan Juke independently and without extern…
How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2019-2026 / MK 2) After performing the standard service on your new Nissan Juke, you need to execute a manual reset to clear the warning message on the dashboard displ…
How to set the language on the Nissan Juke
How to set the language on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) These short and simple steps will show us how to change the language on the multimedia system of the Nissan Juke. First of all, we get into the car a…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos