|
Do it yourself
| |||
| ||||
How to Replace the Reverse Switch on a Nissan Qashqai J10
Model: Nissan Qashqai
J10
- Years 2006-2014
On this Nissan Qashqai J10, the reverse sensor has stopped working. The symptoms are clear: no rear lights, the camera does not activate, and nothing appears on the dashboard indicating that reverse is engaged. The sensor is located under the passenger seat, screwed into the gearbox casing. To replace it, you must first drain the gearbox oil. You can find the spare part on Amazon with the code B0CQZ5VBYG for £13.44, with free delivery for Prime customers. It consists of a small piston that acts as a switch: when pressed, engaging reverse turns on the lights and the reverse. The connector has three pins because it has multiple functions; the screw is for draining the gearbox oil, which should be collected in a bucket (then we will dispose of it properly at an authorised centre): changing the oil every 2-3 years helps keep the gearbox healthy. The fill cap is located on the left side of the vehicle, a bit higher up. This is therefore a simple and quick job.
Posted on 30 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2006-2014 /
J10)
Below are the instructions that will allow you to remove and replace the reverse switch on the Nissan Qashqai 1.5 dCi. First, open the bonnet of the …
Nissan Qashqai
(2014-2022 /
J11)
Today, we will see in this brief guide how to remove and replace the reverse switch on a Nissan Qashqai J11, second series, following the instruction…
Nissan Qashqai
(2006-2014 /
J10)
In this video, you will see where to find the fuse for the reverse lights and rear camera of the Nissan Qashqai J10: it is fuse box number two locate…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.081
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |