Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery for the Nissan Primera

Model: Nissan Primera MK 3 - Years 2002-2008
Part: Key

Follow these simple steps to dismantle and replace the battery in the key fob for the Nissan Primera. First, take your key fob and unscrew the small screw found on the cover; then, open the fob into two parts by prying at the side slot, accessing the circuit board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and the same specification; finally, reassemble the key fob to complete the replacement.

Posted on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Immobiliser on a Nissan Primera
How to Reset the Immobiliser on a Nissan Primera
Nissan Primera (2002-2008 / MK 3) Today, I will explain how to reset the immobiliser control unit on a 2002 Nissan Primera. To perform this operation, we need to remove the lower part…
How to Remove the Front Door Panel of the Nissan Primera
How to Remove the Front Door Panel of the Nissan Primera
Nissan Primera (2002-2008 / MK 3) Today, in this guide, discover the instructions that will allow you to remove the front door panel of the Nissan Primera. First, open the front door …
Where are the fuses of the Nissan Primera located?
Where are the fuses of the Nissan Primera located?
Nissan Primera (2002-2008 / MK 3) All the fuses of the Nissan Primera are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it wil…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos