Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Light on a Nissan Navara

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

Today, you will learn how to reset the airbag error code on a Nissan Navara model D40. To reset the light, turn on the instrument cluster and then turn it off again, repeating this procedure four times. After completing this procedure, the error code should be reset; if not, it will be necessary to visit a workshop for a computer diagnosis as an airbag malfunction compromises the overall safety system of the vehicle in case of an accident.

The main reasons for the airbag not functioning may include a flat battery, a recently replaced battery, a fault in the control unit, and so on.


Posted on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Nissan Navara
How to Remove the Steering Wheel from a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you can begin, disconnect the vehicle's battery to work safely, then sit in the driver's seat of your Nissan Navara. Start by unscrewing and r…
How to remove the steering wheel of the Nissan Navara
How to remove the steering wheel of the Nissan Navara
Nissan Navara (2014-2024 / D23) The instructions in this guide will show us how to disassemble and replace the steering wheel of the Nissan Navara. First, we get into the car and st…
How to Remove the Steering Wheel from the Nissan Navara?
How to Remove the Steering Wheel from the Nissan Navara?
Nissan Navara (2005-2015 / D40) To remove the steering wheel from the Nissan Navara, first remove the clips located at the back of the steering wheel to free the airbag in the centr…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos