Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Steering Track Rod Ends on a Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tie rods

See other generations:
Video tutorial

Are the track rod ends worn out? Let's see how to remove them on a Nissan X-Trail. Position your car on a column lift and raise it to a comfortable height for working.

Unscrew the front wheel nuts with a socket or air impact wrench and remove the wheel. Next, start unscrewing the track rod end nuts with a socket.

Unscrew the nuts located under the track rod end and the stabiliser bar, then pull the track rod end away from the vehicle body. Fit the new track rod end and tighten it with all the associated nuts.

Refit the wheel that was removed earlier. Test the correct operation of the Nissan.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to reset the "Service" indicator on a Nissan X-Trail?
How to reset the "Service" indicator on a Nissan X-Trail?
Nissan X Trail (2014-2023 / MK 3, T32) .. To reset the "Service" light on a Nissan X-Trail, start by turning on the instrument panel without starting the engine. Use the buttons on the steering.. …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) .. guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of the vehicle... …
How to Replace the Air Filter on a Nissan X-Trail
How to Replace the Air Filter on a Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. see how to replace the air filter on a Nissan X-Trail by following some essential steps: first, purchase a new air filter. Next, get inside the vehicle,.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos