Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Removal of rear light and Nissan Qashqai bulbs

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Tail light
Operation: Removal of rear light and Nissan Qashqai bulbs

Today, in this video tutorial we will see how to remove the rear light and how to replace the bulbs of a Nissan Qashqai first series. First we open the boot lid and remove the tailgate panel, unscrewing the screw on the grip handle: then we are going to forcefully unhook the panel by levering the sides. At this point we disconnect the electrical connector of the bulbs and extract the bulb holder together with the bulb, replacing it. To disassemble the light we have to unscrew the side screws of the light and extract it, disconnecting the electrical connectors!


Posted on 25 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - What problem can occur with the rear lights of a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos