Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Interior Bulbs on a Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Light bulb

See other generations:
Video tutorial

The video shows how to replace the interior bulbs of the Nissan Qashqai. Specifically, this involves the bulbs in the cabin and the boot.

Start by removing the cover that protects the bulbs at the front of the cabin. As this is a clip-on mechanism, you can simply use your fingers without any additional tools.

Now, pull out the blown bulbs and fit the new ones in their place, whether they are LED or filament. Finally, refit the cover.

Proceed in the same way with the rear bulbs, remembering to disconnect the connector and open the light unit.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulbs in a Nissan Qashqai?
How to Replace the Dipped Beam Bulbs in a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this tutorial, you will see how to replace the dipped beam bulbs in a Nissan Qashqai, a very simple and quick operation. Start by opening the bonn…
How to Replace the Timing Belt on a Nissan Qashqai
How to Replace the Timing Belt on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To replace the timing belt on a Nissan Qashqai, lift the car so you can remove the front right wheel and the inner cover of the wheel arch. Once this…
How to Replace the Fuel Filter in a Nissan Qashqai?
How to Replace the Fuel Filter in a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To replace the diesel filter in a Nissan Qashqai, open the bonnet to access the right side of the engine compartment. Here, next to the windscreen wa…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos