Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio from a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

Let’s look at how to remove the car radio from a Nissan Juke. Remove the air conditioning control panel (use a plastic lever to pry it off). Remove the stereo trim using a plastic lever (unscrew the securing screws) and detach it from the centre console.

Unscrew the securing screws located on either side of the car radio.

Extract the car radio and disconnect the cables (power and antenna). To reinstall, reverse the disassembly steps.

Perform a functionality check after installing the new car radio.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Removing Front Bumper on Nissan Juke
Removing Front Bumper on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Removing a damaged front bumper? Let's see how to remove the bumper from the Nissan Juke. Remove the side impact absorbers and unscrew the screws in …
How to Unlock the Radio on a Nissan Juke?
How to Unlock the Radio on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) You need to unlock the radio on your Nissan Juke when you disconnect or replace the vehicle's battery. Once you reconnect the radio, it will be locke…
Removing the Door Panel on a Nissan Juke
Removing the Door Panel on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Is the door panel damaged? Here’s how to remove the door panel on a Nissan Juke. Unscrew the screws located in the handle area; disconnect the window…

    Frequently Asked Questions

    • Juke 2010-2019 - How can I retrieve the "pin code" of the car radio of my Nissan Juke? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos