Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Warning Light on Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Warning light – error code

Here’s how to reset the warning light on a Nissan Juke. Use the button located at the centre of the instrument cluster (right button). Press and hold the right button while turning on the ignition with the key. Once the instrument cluster is on, wait for the maintenance warning light to reset. Release the button as soon as the reset message appears on the display. Turn off and on the ignition to check the maintenance status. For safety reasons, perform the vehicle settings while the vehicle is stationary and the engine is off.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Here are the steps to reset the service light for the regular maintenance oil change on the Nissan Juke. First, get into the vehicle and press and ho…
Reset Service Light on Nissan Juke
Reset Service Light on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrumen…
How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The following video tutorial shows how to reset the service light on a Nissan Juke independently. If the light does not reset, a visit to the garage …

Other guides you may be interested in

    Frequently Asked Questions

    • Juke 2010-2019 - Why did the P / S light come on in the Nissan Juke? Read answer
    • Juke 2010-2019 - What does the red engine light on the Nissan Juke mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos