Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Knob on Nissan Almera

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: A/C controls

See other generations:
Video tutorial

Using a plastic lever, pry around the plastic trims of the air vents and remove them. Similarly, dismantle the radio by unscrewing the small fixing screws and disconnect the connectors to remove it completely.

Again, using the plastic lever (or a small flat-head screwdriver, taking care not to scratch the trims), detach the frame around the knobs. Remove this panel, open the lower cover where the knob connectors are attached.

Manually detach the faulty knob and fit the new one, connecting its connector. Proceed in reverse for complete reassembly.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Where is the air conditioning relay located in the Nissan Almera?
Where is the air conditioning relay located in the Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) In the event of a sudden failure of the air conditioning in your Nissan Almera, the first thing to do is check that the respective relay is functioni…
Replacing the Timing Chain on the Nissan Almera
Replacing the Timing Chain on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Here are the main instructions for replacing the timing chain on the Nissan Almera. First, open the bonnet of your car and start by removing the batt…
Where is the fuse box located in the cabin of the Nissan Almera N16?
Where is the fuse box located in the cabin of the Nissan Almera N16?
Nissan Almera (2000-2008 / N16, MK 2) In this new guide aimed at all of you who own a Nissan Almera N16, we will help you find the fuse box in the cabin in just a few seconds. First, get …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos