Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery on a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Key

To start, extract the manual key from the remote. Once done, use a small flat screwdriver to pry open the key casing along the central groove around the remote. Voila! Here is the key battery. Again, use the flat screwdriver to lever under the battery, removing it from its housing. Insert the new battery you purchased, which is a CR2025 and can be found in any hardware store or large supermarket. Close the casing and reinsert the manual key.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Nissan Juke remote control
How to replace the battery of the Nissan Juke remote control
Nissan Juke (2010-2019 / MK 1) Replacing the battery of the remote control for the Nissan Juke car is a simple and quick operation to be carried out independently. To replace it, w…
Replacing Key Battery on Nissan Juke
Replacing Key Battery on Nissan Juke
Nissan Juke (2010-2019 / MK 1) How to disassemble the Juke key? Let’s see how to disassemble the Nissan remote key. Take the Nissan key and remove the metal key inside. Once the me…
How to Replace the Remote Control Battery of the Nissan Juke?
How to Replace the Remote Control Battery of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the remote control battery of the Nissan Juke, use a small screwdriver to lower the switch on the back of the remote, allowing the key to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos