Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on Nissan Leaf

Model: Nissan Leaf ZE0, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

Changing the ignition key battery on a Nissan car is extremely simple. On the back, there is a small switch to push, allowing you to slide out the manual key (set it aside).

As clearly shown in the video, now split the key in half (use a small flat screwdriver, it will take a second) separating the part with the buttons from the part where you removed the manual spare key. Voila! Now you will find your battery. Simply lift it out with your fingers and place the new one in its place.

Reassemble the two parts of the key and insert the manual key; job done!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Nissan Leaf
How to Replace the Key Battery on a Nissan Leaf
Nissan Leaf (2010-2017 / ZE0, MK 1) Replacing the battery inside your Nissan Leaf key is very simple, and you can complete the operation in just a few seconds by following this procedur…
How to replace the key battery of the Nissan Leaf
How to replace the key battery of the Nissan Leaf
Nissan Leaf (2010-2017 / ZE0, MK 1) If your Nissan Leaf key has suddenly stopped working and you are wondering how to replace the battery inside, follow the steps described in this new …
How to replace the battery in the Nissan Leaf remote control.
Nissan Leaf (2010-2017 / ZE0, MK 1) If the remote control of your first-generation Nissan Leaf has suddenly stopped working and you want to find out how to replace the battery inside it…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos