Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Internal and External Handles on Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

Using a plastic trim tool, remove the plastic cover of the internal handle, unscrew the two screws underneath, and remove it. Remove the door panel, again using the plastic trim tool, and disconnect the connector. Lower the window until you can unscrew the bolt, then remove it. At this point, you can unscrew the internal handle and all the screws present in the inner panel.

Remove the side screw cover and unscrew the bolt related to the lock, then remove the external handle. Proceed in reverse order for reassembly.

Good luck!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Replace the Door Handle on a Nissan Qashqai?
How to Replace the Door Handle on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To replace the door handle on a Nissan Qashqai, first remove the cover of the internal grab handle to access the screws hidden beneath it. This will …
How to Replace the Internal Handle of the Nissan Qashqai?
How to Replace the Internal Handle of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) This tutorial shows how to replace an internal handle of the Nissan Qashqai. First, extract the switch panel containing the window controls and disco…
How to Remove the Door Panel on a Nissan Qashqai?
How to Remove the Door Panel on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) Removing the door panel on a Nissan Qashqai is very simple. For this operation, you will need a plastic trim tool for removing the inserts and a 10 m…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos