Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Internal Handle of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

This tutorial shows how to replace an internal handle of the Nissan Qashqai. First, extract the switch panel containing the window controls and disconnect the connector.

Then, remove the cover of the support handle and unscrew the two internal screws. At this point, you can remove the entire door panel to access the fixing bolt of the handle to be replaced.

Unscrew the bolt with a 10mm spanner, disconnect the cable, and replace the mechanism. To reassemble, simply follow the same procedure in reverse.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Door Handle on a Nissan Qashqai?
How to Replace the Door Handle on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To replace the door handle on a Nissan Qashqai, first remove the cover of the internal grab handle to access the screws hidden beneath it. This will …
Removing Internal and External Handles on Nissan Qashqai
Removing Internal and External Handles on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Using a plastic trim tool, remove the plastic cover of the internal handle, unscrew the two screws underneath, and remove it. Remove the door panel, …
How to Remove the Timing Belt from a Nissan Qashqai
How to Remove the Timing Belt from a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos