Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Car stereo

Before you start, sit in the driver's seat of your Nissan Juke. Begin by unclipping the lower clips that secure the climate control buttons, then disengage and remove the buttons themselves, and finally disconnect the associated electrical connector. This will reveal the screws that secure the radio frame to the dashboard. Next, unscrew and remove the fastening screws, then disengage and remove the frame. After that, unscrew and remove the screws securing the radio. At this point, extract the radio from its housing, then disconnect the associated electrical connector, and you will have completed the removal.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Nissan Juke Radio
Dismantling the Nissan Juke Radio
Nissan Juke (2010-2019 / MK 1) Today, you will learn how to dismantle the radio of a Nissan Juke in simple steps. First, get inside the car and remove the plastic trim around the r…
How to Change the Time on the Nissan Juke
How to Change the Time on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) To manually change the time displayed on your first-generation Nissan Juke (2010-2019), follow these simple steps. First, get in the car and turn on …
How to Replace the Radio in a Nissan Juke?
How to Replace the Radio in a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the radio in a Nissan Juke, use a tool to pry off the cover from the lower part of the radio, which surrounds the climate control buttons.…

Other guides you may be interested in

    Frequently Asked Questions

    • Juke 2010-2019 - How can I retrieve the "pin code" of the car radio of my Nissan Juke? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos