Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Nissan Juke?

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in a Nissan Juke, use a tool to pry off the cover from the lower part of the radio, which surrounds the climate control buttons. Once this cover is removed, detach the upper cover that surrounds the radio screen.

After all these covers have been removed, unscrew the screws that secure the radio in its housing so that it can be fully extracted. After disconnecting the connectors, connect the new device, securing it and covering it with the previously removed plastics.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Reset the Radio in a Nissan Juke?
How to Reset the Radio in a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The video demonstrates how to reset the radio in a Nissan Juke. This model featured in the video has a basic radio without a touchscreen, and it may …
Removing the Car Radio on a Nissan Juke
Removing the Car Radio on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today, we will show you how to replace the car radio on a Nissan Juke. Remove the climate control panel cover to access the screws underneath. Next, …
How to Remove the Radio from a Nissan Juke
How to Remove the Radio from a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Before you start, sit in the driver's seat of your Nissan Juke. Begin by unclipping the lower clips that secure the climate control buttons, then dis…

    Frequently Asked Questions

    • Juke 2010-2019 - How can I retrieve the "pin code" of the car radio of my Nissan Juke? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos