Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the fuses on a Nissan Micra k13

Model: Nissan Micra K13 - Years 2010-2017
Part: Fuse box

Do we want to replace the fuses of a Nissan Micra K13? Let's see where we can find them and how to replace them from inside the box. We lift the front hood and locate the fuse box. Remove the cap placed next to the car power supply battery, remove it from the fuse box. Once the box is discovered, we replace the damaged fuses with new ones (help us with a needle nose pliers). At the end of the maintenance, we mount the cap of the fuse box and close the front hood. We close the front hood and start the engine to check all electrical devices.

Posted on 29 April 2021 by ScegliAuto

Video tutorial

Related tutorials

Nissan Micra K13 fuse box layout and location
Nissan Micra K13 fuse box layout and location
Nissan Micra (2010-2017 / K13) Let's see in this short and simple guide the layout and positioning of the fuse boxes of the Nissan Micra K13, following these simple steps. First we…
Where is the fuse box located for the Nissan Micra 2005?
Where is the fuse box located for the Nissan Micra 2005?
Nissan Micra (2010-2017 / K13) If you still don't know where the fuse box of your 2005 Nissan Micra K13 is located, don't worry because in the following guide you will find all the…
How to replace the rear wiper on Nissan Micra K13
How to replace the rear wiper on Nissan Micra K13
Nissan Micra (2010-2017 / K13) Let's see in this short video how to change the rear wiper on a Nissan Micra K13, third series, in simple and quick steps. First we go to raise our r…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos