Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Nissan Juke Radio

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

Today, you will learn how to dismantle the radio of a Nissan Juke in simple steps. First, get inside the car and remove the plastic trim around the radio using a thin tool to pry it off. Then, unscrew the fixing screws located underneath with a screwdriver.

At this point, you can pull the radio out towards you; to remove it completely, disconnect the electrical connectors found at the back (there are four). For reassembly, follow the reverse procedure.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Removing the Car Radio on a Nissan Juke
Removing the Car Radio on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today, we will show you how to replace the car radio on a Nissan Juke. Remove the climate control panel cover to access the screws underneath. Next, …
How to remove the car radio from the Nissan Juke
How to remove the car radio from the Nissan Juke
Nissan Juke (2010-2019 / MK 1) If the stock car radio in your first-generation Nissan Juke has stopped working and you want to replace it, but you don't know how to remove it corre…
How to enter the radio unlock code in the Nissan Juke?
How to enter the radio unlock code in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this tutorial, you will see how to enter the radio unlock code in the Nissan Juke, a very simple and quick operation to perform, for example, afte…

    Frequently Asked Questions

    • Juke 2010-2019 - How can I retrieve the "pin code" of the car radio of my Nissan Juke? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos