Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on a Nissan Qashqai?

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Bearing

To replace the rear wheel bearing on a Nissan Qashqai, first remove the rear wheel and the brake drum. Once removed, loosen the cap of the wheel hub nut, which is connected to the old bearing. After these two pieces are removed, install the new wheel hub along with the corresponding bearing. It must be secured with the appropriate bolts, and only after securing it can you reinstall the previously removed drum and wheel.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the spare wheel of a Nissan Qashqai?
Where is and how to reach the spare wheel of a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) Good morning, today's guide aims to discover where the spare wheel of our Nissan Qashqai is located and how to reach it. The spare wheel is positione…
How to Replace the Rear Brake Pads on a Nissan Qashqai
How to Replace the Rear Brake Pads on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before starting, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel, loosening the fixing bolts. Next, unscrew and remove the bol…
How to Replace the Rear Brake Pads on a Nissan Qashqai
How to Replace the Rear Brake Pads on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you can start, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos