Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the Dashboard

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Instrument cluster

See other generations:
Video tutorial

Removing the instrument cluster from the dashboard is a seemingly simple task but must be done with great care to avoid damage. Using a screwdriver, unscrew the retaining screws of the instrument cluster assembly.

With force but also great caution, pull the entire instrument cluster block outward, being very careful. Disconnect both rear connections to free the instruments, then remove the instruments.

To remove the rear cover, unscrew all the screws; now it is possible to take out the electronic circuit. To reassemble, follow the same steps in reverse.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Radio in the Nissan Almera
Guide to Replacing the Radio in the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Today, let's go through the instructions for removing and replacing the standard radio in the Nissan Almera in simple, quick steps. First, get in the…
How to Remove and Replace the Antenna on the Nissan Almera
How to Remove and Replace the Antenna on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video tutorial, you will see the steps necessary to remove and replace the antenna on the Nissan Almera. First, get inside the vehicle and st…
How to replace the tail lights on the Nissan Almera?
How to replace the tail lights on the Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) In this tutorial, we will see how to replace the rear lights on a Nissan Almera, a process that is extremely simple and quick. First, let's make sure…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos