Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust Manifold on the Nissan Altima?

Model: Nissan Nissan Various
Part: Checks and maintenance

To remove the exhaust manifold from the Nissan Altima, open the bonnet and remove the plastic cover from the front of the engine. Next, you will need to disconnect the manifold from the pipes and the engine: to disconnect it from the pipes, access from underneath the car and loosen the securing bolts. The securing bolts will also need to be loosened to detach the upper part of the manifold from the engine. Once all the bolts have been loosened, you can carefully remove the manifold. Finally, you can install the new manifold.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat on a Nissan Car
How to Remove the Rear Seat on a Nissan Car
Nissan Nissan Various In our example related to the video, we are dealing with a Nissan Altima. To do this job, you will need to clear the boot, removing the mat as well. …
How to disassemble the steering wheel airbag on a Nissan vehicle
How to disassemble the steering wheel airbag on a Nissan vehicle
Nissan Nissan Various Disassembling the steering wheel airbag on a Nissan vehicle is a fairly simple operation to perform independently. To carry out this operation, we mu…
How to set the clock on the radio in Nissan vehicles
How to set the clock on the radio in Nissan vehicles
Nissan Nissan Various Today we will explain how to adjust the radio clock on Nissan vehicles produced from 2012 to 2016. To adjust the time, we need to turn on the instrum…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos