Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery and Repair the Two-Button Remote for Nissan

Model: Nissan Nissan Various
Part: Key

Video tutorial

This guide shows how to replace the battery of the two-button remote and its switches for Nissan. The necessary tools are: a small flat screwdriver, tweezers, wire cutters, a CR2025 battery, a soldering iron, and the replacement parts.

On the back, use the screwdriver to pry open the remote. With the screwdriver, remove the two retaining clips of the remote cover.

Once the integrated circuit is removed from the housing, disconnect the battery terminal and begin replacing the switches. Use the soldering iron to melt the solder on both pins of the switch and then remove it. At this point, apply some solder to one of the pads of both switches; position the new parts and solder them in place.

Cut the plastic pin on the remote button to adjust its positioning. Reassemble everything following the disassembly procedure.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Nissan
How to Replace the Key Battery of a Nissan
Nissan Nissan Various When the key battery on Nissan vehicles stops working, it means you need to replace the battery. Start the battery replacement by pressing the button…
How to Replace the Remote Battery of the Nissan X-Terra?
How to Replace the Remote Battery of the Nissan X-Terra?
Nissan Nissan Various Replacing the remote battery of the Nissan X-Terra is an extremely simple and quick task. Here’s how to proceed in this tutorial. You will need a rep…
How to Replace the Key Battery of the Nissan Maxima
How to Replace the Key Battery of the Nissan Maxima
Nissan Nissan Various Replacing the key battery of the Nissan Maxima is a simple and quick task that will take only a few minutes of your time. First, press the button on …

    Frequently Asked Questions

    • Nissan Vari - Why is the Nissan smart key not working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos