Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the ECU on the Nissan X-Trail MK2

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

This brief guide shows how to reset the ECU or control unit on the Nissan X-Trail second generation, as well as on most Nissan models from 2006 onwards. First, get inside the vehicle and turn on the ignition; within three seconds, press the accelerator pedal five times, as shown in the video.

Then, wait for about seven seconds and press and hold the accelerator pedal for ten seconds. You will see the engine or ECU warning light start to flash more quickly until it turns off completely!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Resetting the Engine Control Unit of the Nissan X-Trail
Resetting the Engine Control Unit of the Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) This guide provides instructions to reset the ECU of the Nissan X-Trail. First, get into the vehicle and turn on the instrument panel; then press the…
How do you reset the Nissan X-Trail's ECU?
How do you reset the Nissan X-Trail's ECU?
Nissan X Trail (2001-2006 / MK 1, T30) In order to reset the ECU of the Nissan X-Trail, you need to insert the ignition key into the ignition switch: once the dashboard is turned on, you c…
How to Reset the Oil Service Light on a Nissan X-Trail?
How to Reset the Oil Service Light on a Nissan X-Trail?
Nissan X Trail (2014-2023 / MK 3, T32) In this tutorial, you will see how to reset the oil service light on a Nissan X-Trail, a very simple and quick operation. Before proceeding, ensure t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos