Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : Removing the Nissan Qashqai door panel

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Door panel
Operation: Removing the Nissan Qashqai door panel

Remove the screw cover located near the opening handle, using a small flat screwdriver or any pointed tool, and unscrew the screw below. Similarly, remove the cover of the central handle (if you used a plastic wedge) and unscrew the other two screws that are now in view. Still using the plastic wedge or flat screwdriver, now extract the window control panel and disconnect its connectors. Once you have arrived here, you just need to pry all the way around the panel by pulling it out of the door a small part at a time, until it is completely removed. Disconnect the lock wire.


Posted on 30 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos