Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the diesel filter on Nissan Qashqai 1.5 DCI

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Diesel filter
Operation: How to replace the diesel filter on Nissan Qashqai 1.5 DCI

Let's see in this short and simple guide the steps on how to remove and replace the Nissan Qashqai 1.5 DCI diesel filter. First of all we open the bonnet and start by removing the plastic cover of the diesel fuel filter; after which we disconnect the fuel pipes and also disconnect the electrical connector of the sensor, as shown in the video. At this point we unscrew the screw of the bracket to remove and replace our filter with the new one, with the original spare part; then we reassemble everything and make the connections, applying the reverse procedure!


Posted on 18 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the diesel filter in the Nissan Qashqai 1.5 DCI? Read Answer
    • Qashqai 2006-2014 - How much does the diesel filter cost in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why did the lamp showing an ampoule come on in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Diesel filter lease on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos