Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Headlight bulb replacement

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Light bulb
Operation: Headlight bulb replacement

This short video tutorial explains how to replace the out of order headlight bulb on a Nissan Micra. Open the engine hood; identify the non-working headlight and then, by pressing with two fingers, unhook the electrical connection of the headlight. Remove the rubber cover of the bulb and unhook the spring clip that holds the bulb. At this point, remove the burnt bulb. Take a completely new one and place it like the one you just replaced. Attach the clip and replace the rubber cover. As a last step, re-establish the electrical connection.


Posted on 30 July 2023 by ScegliAuto



Replacement of the Nissan Micra's parking light bulb.
Nissan Micra (2010-2017 / K13) When the position light bulb of the Nissan Micra burns out, we need to replace it as soon as possible, for our safety and to avoid penalties. We open
Nissan Micra headlight bulb replacement
Nissan Micra (2002-2010 / K12) Are the headlight bulbs damaged? Let's see how they replace the headlight from inside. We lift the front hood and locate the back of the headlight. F
Nissan Micra K12 rear light bulb replacement
Nissan Micra (2002-2010 / K12) The replacement of the rear light bulb is very simple to carry out but it is necessary to remove the light itself: therefore open the rear hood and i

Other guides that may interest you

    Frequently Asked Questions

    • Micra 2017-2024 - How to replace the headlight bulb on Nissan Micra? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos