Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamps on a Nissan Maxima?

Model: Nissan Maxima MK 7, A35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front headlamps on a Nissan Maxima, which requires removing the bumper. Start by opening the bonnet, then remove each upper plastic rivet with a flathead screwdriver.

Next, remove the two bolts located at the ends of the front grille and the other two located in each wheel arch. Proceed with the lower rivets and the remaining bumper bolts to completely remove it. Once done, you will have access to the headlamp mounting bolts, which need to be undone.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Nissan Maxima?
How do you reset the tire pressure light on the Nissan Maxima?
Nissan Maxima (2003-2008 / MK 6, A34) To reset the tire pressure light of the Nissan Maxima, you need to inflate the tires until they reach the recommended pressure value: this value will…
Fuse box diagram of the Nissan Maxima
Fuse box diagram of the Nissan Maxima
Nissan Maxima (1999-2003 / MK 5, A33b) In the video tutorial below the article, the fuse box diagram for the Nissan Maxima is explained. In addition to the diagram, the video shows the loc…
What is the Windscreen Washer Fuse in a Nissan Maxima?
What is the Windscreen Washer Fuse in a Nissan Maxima?
Nissan Maxima (1999-2003 / MK 5, A33b) If the windscreen washers on your Nissan Maxima have suddenly stopped working, first check the status of the relevant fuse, the location of which is …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos