Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Nissan Rogue?

Model: Nissan Rogue S35 - Years 2008-2015
Part: Headlight

To replace the front headlight of the Nissan Rogue, lift the hood to access the screws and rivets located on the grille at the front of the engine compartment. Once the grille is removed, loosen the screws located under the inner fender cover that secure the headlight from the inside. After these are removed, pull the headlight out of its housing and disconnect the connector at the back. Next, connect the new headlight and insert it into its housing.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Nissan Rogue
How to Replace the Headlight Bulb on a Nissan Rogue
Nissan Rogue (2008-2015 / S35) To replace the headlight bulb on a Nissan Rogue, open the hood to access the back of the headlight in question. Here, you will find the connector att…
How to replace the headlight on the Nissan Rogue?
How to replace the headlight on the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) To replace the headlight on the Nissan Rogue, open the hood to access the screws located at the top of the front bumper. Next, loosen the screws foun…
Replacement of the front headlight bulbs of the Nissan Rogue
Replacement of the front headlight bulbs of the Nissan Rogue
Nissan Rogue (2008-2015 / S35) The following instructions will show us how to disassemble and replace the headlight bulb of the Nissan Rogue, in simple steps. First, open the hood …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos