Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight on the Nissan Rogue?

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

See other generations:
Video tutorial

To replace the headlight on the Nissan Rogue, open the hood to access the screws located at the top of the front bumper. Next, loosen the screws found inside the wheel well corresponding to the headlight being replaced.

Once all these screws are loosened, you can detach the bumper and loosen the screws underneath to free the headlight. This can then be removed by disconnecting the connectors at the back.

After removing the old headlight, you can install a new one by reassembling all the removed parts.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Nissan Rogue
How to Replace the Headlight Bulb on a Nissan Rogue
Nissan Rogue (2008-2015 / S35) To replace the headlight bulb on a Nissan Rogue, open the hood to access the back of the headlight in question. Here, you will find the connector att…
How to Replace the Front Headlight Bulb on a Nissan Rogue?
How to Replace the Front Headlight Bulb on a Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To replace the front headlight bulb on a Nissan Rogue, open the hood to access the engine compartment. The back of the headlight will not be accessib…
How to Remove the Front Headlight of the Nissan Rogue?
How to Remove the Front Headlight of the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To replace the front headlight of the Nissan Rogue, lift the hood to access the screws and rivets located on the grille at the front of the engine co…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos