Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Nissan Livina Grand Livina

Model: Nissan Livinia Grand Livinia MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Battery

See other generations:
Video tutorial

To replace the battery in this vehicle model, refer to the video and follow the instructions below. After opening the hood, locate the battery on the right side and disconnect the negative terminal first, then the positive terminal.

Next, remove the support bolt for the mounting plate on top. This will free the battery, allowing you to remove it from the compartment and install the new one. Then, reattach the support bolt for the mounting plate on top and reconnect the positive terminal first, followed by the negative terminal.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Nissan Livina Grand Livina
How to Reset the Maintenance Light on a Nissan Livina Grand Livina
Nissan Livinia Grand Livinia (2006-2013 / MK 1) In this guide, you will learn how to reset the maintenance light for the Nissan Livina Grand Livina. To proceed, follow these steps in order: 1. Turn…
How to Change the Oil on a Nissan Grand Livina
How to Change the Oil on a Nissan Grand Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) To change the oil on a Nissan Grand Livina comfortably, lift the vehicle - do not rely too much on your jack; if possible, use a wheel as a spacer - …
How to Replace the Cabin Filter in a Nissan Grand Livina?
How to Replace the Cabin Filter in a Nissan Grand Livina?
Nissan Livinia Grand Livinia (2013-2020 / MK 2) In this tutorial, we will see how to replace the cabin filter in a Nissan Grand Livina, a very simple and quick operation. First, sit in the passenge…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos