|
Do it yourself
| |||
| ||||
How to Remove the Spiral Contact on Nissan Pathfinder R51 2006-2012
Model: Nissan Pathfinder
MK 3, R51
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
This tutorial outlines the steps necessary to extract the spiral contact from the airbag unit on a Nissan Pathfinder R51 2006-2012. It may need to be replaced if the airbag warning light comes on. The first step is to remove the central airbag unit by pressing down on the button at the bottom of the steering wheel with a screwdriver. Exercise extreme caution, as you need to carefully extract the airbag unit and disconnect the horn and airbag wires. The next step is to remove the steering wheel; there is a central bolt to undo using a 19 mm socket. It may be difficult to pull off, so wiggle it a bit and then pull it off with firm jerks. To extract the spiral contact, now separate the plastic cover that protects it by unscrewing the two screws located at the bottom. You can now detach the spiral contact from the steering column using the two levers (which you will easily detach later); simply unscrew the two long horizontal screws and pull it out. Reattach the two side levers to the new spiral contact and reassemble everything in reverse order.
Updated on 30 May 2026 by ScegliAuto
Related tutorials
Nissan Pathfinder
(2005-2012 /
MK 3, R51)
Below we will see the instructions that will allow us to disassemble and replace the console and the center tunnel of the Nissan Pathfinder. First, w…
Nissan Pathfinder
(2005-2012 /
MK 3, R51)
In this mini guide, you will discover where to find the fuse box on your Nissan Pathfinder Mk3. Before proceeding, ensure the vehicle is parked on a …
Nissan Pathfinder
(2005-2012 /
MK 3, R51)
Here are brief instructions on how to remove and replace the courtesy light bulb located at the bottom of the door panel in the Nissan Pathfinder. Fi…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |