Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Position Bulbs of the Nissan Qashqai J10

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb

In today's tutorial, you will learn how to disassemble and replace the front headlight bulbs, specifically the position bulbs, of the Nissan Qashqai J10, first series. First, open the bonnet and remove the plastic protective cap of the bulbs; then, remove the position bulb by disconnecting it along with the electrical connector to replace it with a new one. At this point, remove and replace the dipped beam bulb by disconnecting the electrical connector and releasing the metal clip; then replace it with the correct new bulb (H7 type).

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the Nissan Qashqai J10?
Where is the fuse box located in the cabin of the Nissan Qashqai J10?
Nissan Qashqai (2006-2014 / J10) In order to find the box containing all the fuses of the cabin of your Nissan Qashqai J10, you must follow the few simple steps described in our new …
Replace Headlight Bulbs on Nissan Qashqai
Replace Headlight Bulbs on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Are the bulbs damaged on your Nissan Qashqai? Here’s how to remove them from the front headlamp. Lift the front bonnet by pulling the lever located a…
Replacing the Pollen Filter on Nissan Qashqai J10
Replacing the Pollen Filter on Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) To access the cabin air filter, or pollen filter, on a Nissan Qashqai J10, you need to crouch down and work in the footwell area and manually remove …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos