Do it yourself
Frequently asked questions about cars and motorcycles

How can I reset the service light on my Nissan Juke?

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Service warning light

To reset the service light on your Nissan Juke, you won't need any tools; it's a very simple operation. First, turn on the ignition with the appropriate key and press (holding it down) the right button, located near the car's speedometer. Release the button and then turn off the ignition. At this point, turn the ignition back on and confirm with the right button. Now turn off the ignition after the service reset to verify it has been completed correctly. Always remember to make service adjustments with the vehicle stationary and turned off.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Juke (2010-2019 / MK 1) Here are the steps to reset the service light for the regular maintenance oil change on the Nissan Juke. First, get into the vehicle and press and ho…
Nissan Juke (2010-2019 / MK 1) The following video tutorial shows how to reset the service light on a Nissan Juke independently. If the light does not reset, a visit to the garage …
Nissan Juke (2019-2026 / MK 2) To reset the Service light on the Nissan Juke, turn on the ignition and then navigate through the menu using the directional controls on the left sid…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos