Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Altima
    4. : How to replace the front speakers of Nissan Altima L32

Nissan Altima - Video tutorial

Model: Nissan Altima L32 - Years 2007-2012
Part: Loudspeaker
Operation: How to replace the front speakers of Nissan Altima L32

Today we will see, in this video tutorial, how to disassemble and replace the front speakers of the Nissan Altima L32, following these simple steps. First we open the front door and start by removing the door panel; to do this we unscrew all the screws that we find on it, then removing the push-button panel and disconnecting its electrical wiring, as shown in the video. At this point we use a socket wrench to unscrew the speaker screws, disconnecting the electrical connector; let's remove it and replace it with the new one, following the video to the end!


Posted on 17 August 2022 by ScegliAuto



How to reset the service light on Nissan Altima l32
Nissan Altima (2007-2012 / L32) The guide shows how to reset the service light on the Nissan Altima l32. Using the paddle controls, press the square button on the left side of the s
How to replace the cabin air filter on Nissan Altima L32
Nissan Altima (2007-2012 / L32) Today we will discover the steps on how to remove and replace the cabin air filter of the Nissan Altima L32. First of all, let's get on board the car
How do you remove the front bumper of the Nissan Altima?
Nissan Altima (2007-2012 / L32) In order to replace the front bumper of the Nissan Altima you need to open the hood so that you can detach the fastening rivets placed in the front p

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos