Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Altima
    4. : How to replace the cabin air filter on Nissan Altima L32

Nissan Altima - Video tutorial

Model: Nissan Altima L32 - Years 2007-2012
Part: Cabin air filter
Operation: How to replace the cabin air filter on Nissan Altima L32

Today we will discover the steps on how to remove and replace the cabin air filter of the Nissan Altima L32. First of all, let's get on board the car, on the passenger side, and start by removing our glove box; to do this we unscrew the screws that we find inside, removing the side plastic cover and the one that we find under the drawer itself, as shown in the video. At this point we remove the plastic cover to extract the passenger compartment air filter; then let's replace it with the new one, inserting it in the correct direction (which is usually indicated with arrows printed on the filter itself).


Posted on 8 July 2022 by ScegliAuto



How do I replace the cabin air filter on my Nissan Altima?
Nissan Altima (2007-2012 / L32) In this short video we will show you how to replace the cabin air filter in your Nissan Altima. Let's start by going under the glovebox; on the left
How to replace the cabin air filter on a Nissan Altima.
Nissan Altima (2007-2012 / L32) In this guide we will show how to replace the cabin air filter of a Nissan Altima. Let's start by going under the glove box; on the left we will have
How to replace the filters in the Nissan Altima
Nissan Altima (2007-2012 / L32) In today's video we see how to replace the air filter and cabin filter in the Nissan Altima. Let's start with the first unit. We open the engine hood

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos