Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Filters in a Nissan Altima

Model: Nissan Altima L32 - Years 2007-2012
Part: Air filter

In today's video, you will see how to replace the air filter and cabin filter in a Nissan Altima. Start with the air filter. Open the hood and locate the intake duct. Then, remove the air filter and clean the area, then proceed to install the new one. Now, get into the car from the passenger side and remove the glove compartment by unscrewing the corresponding screws. You can now access the work area. Remove the cover and take out the worn air filter. Clean this area as well and then install the new piece.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the 2015 Nissan Altima
How to reset the maintenance light on the 2015 Nissan Altima
Nissan Altima (2013-2018 / L33) To manually reset the maintenance light on your 2015 Nissan Altima, you must follow the procedure described in this new guide. First, turn on the ins…
How to Reset the Maintenance Light on Nissan Altima
How to Reset the Maintenance Light on Nissan Altima
Nissan Altima (2002-2006 / L31) In this video tutorial, you will see how to reset the maintenance light on a Nissan Altima. When the service light (SERVICE ENGINE SOON) comes on, yo…
Where to Find the Fuse Box of the 2004 Nissan Altima
Where to Find the Fuse Box of the 2004 Nissan Altima
Nissan Altima (2002-2006 / L31) If you haven't been able to locate the box that contains all the various fuses in your 2004 Nissan Altima, don't worry because below we will provide …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos