Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Altima
    4. : How to replace the cabin filter in Nissan Altima?

Nissan Altima - Video tutorial

Model: Nissan Altima L32 - Years 2007-2012
Part: Cabin air filter
Operation: How to replace the cabin filter in Nissan Altima?

Replacing the cabin air filter in the Nissan Altima is a very simple operation, let's see how to proceed in this tutorial. With a cross-tip screwdriver unscrew the three screws located under the glove compartment, open the drawer and unscrew the other three upper and two internal screws. At this point, we also remove the side panel of the dashboard and extract the entire compartment by pulling it towards us. On the left wall we can see a rectangular door, let's open it by pressing the lower clip, extract the filter and insert the spare, positioning it in the right direction. Finally, we reassemble everything by following the reverse procedure.


Posted on 17 August 2022 by ScegliAuto



How to replace the cabin filter in Nissan Altima?
Nissan Altima (2013-2018 / L33) In this tutorial we can see how to replace the cabin filter in the Nissan Altima, a very simple and fast operation. It is located under the dashboard
How to replace the cabin filter on Nissan Altima?
Nissan Altima (2007-2012 / L32) In this video we can see how to replace the cabin filter in the Nissan Altima, a very simple and fast operation. Since the filter is located behind t
How to change the cabin air filter of the 2016 Nissan Altima
Nissan Altima (2013-2018 / L33) If you are looking for a guide to help you step by step in completing the replacement of the cabin air filter inside your 2016 Nissan Altima, then yo

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos