Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : How to reset Nissan Rogue t32 engine oil change light

Nissan Rogue - Video tutorial

Model: Nissan Rogue T32 - Years 2014-2020
Part: Instrument cluster
Operation: How to reset Nissan Rogue t32 engine oil change light

The guide shows how to reset the oil change and filter light on Nissan Rogue t32. The reset operation must be performed with the machine engine running. After pressing any arrow on the left side of the steering wheel, scroll left or right until you reach the vehicle settings tab. Go down to the item â € œMaintenanceâ € and select the item relating to the engine oil and its filter. Then, select the item relating to reset and wait for the correct completion of the operation. At this point it is possible to go back by pressing the return key placed immediately under the arrows.


Posted on 22 August 2022 by ScegliAuto



How to reset the oil light on the 2020 Nissan Rogue
Nissan Rogue (2014-2020 / T32) If the alarm light for the oil change on your 2020 Nissan Rogue continues to stay on even after it has been recently replaced, do not worry because w
How to reset the service light on Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this video tutorial you can see how you can reset the service warning light on Nissan Rogue, following a few simple steps that will guide you towa
How to reset the Nissan Rogue maintenance light
Nissan Rogue (2014-2020 / T32) In this new guide we will describe a very simple method that will allow you to perform the restoration of the maintenance warning light on your Nissa

Other guides that may interest you

    Frequently Asked Questions

    • Rogue 2014-2020 - Why is the fuel gauge of the Nissan Rogue not working? Read Answer
    • Rogue 2021-2027 - Why does the Nissan Rogue AdBlue warning light stay on? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos