Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Oil filter

See other generations:
Video tutorial

In this video, you will learn how to change the engine oil and oil filter on a Nissan QASHQAI J11. First, raise the car with a jack, locate the oil sump, position a large container underneath, and unscrew the bolt. Wait for the engine oil to completely drain, then close it all up. Next, open the engine bay, disconnect the hose located to the right of the oil cap using a screwdriver by applying pressure on the clamp.

You will now be able to see the oil filter underneath. Using a 903-6 spanner, unscrew the oil filter and pull it away.

Insert the new filter after lubricating the seal with some oil, then screw it in place. Finally, fill with new oil according to the engine type.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Nissan Qashqai 1.5 DCi
How to Replace the Engine Oil and Oil Filter on the Nissan Qashqai 1.5 DCi
Nissan Qashqai (2014-2022 / J11) Today, follow these instructions to help you replace the engine oil and oil filter while performing the routine maintenance service on the Nissan Qas…
How to Change Engine Oil and Filter in a Nissan Qashqai
How to Change Engine Oil and Filter in a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To change the engine oil and filter in a Nissan Qashqai, warm up the engine for a few minutes, then turn it off and lift the vehicle. Place a contain…
How to Change the Oil Filter on the Nissan Qashqai J12
How to Change the Oil Filter on the Nissan Qashqai J12
Nissan Qashqai (2021-2026 / J12) In this guide for your Nissan Qashqai J12 (2021-2023), discover how to quickly and safely replace the oil filter. Before you start, ensure the car is…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos