Do it yourself
| ||||
|
Nissan X Trail - Video tutorial
Model: Nissan X Trail
T31, MK 2
- Years 2007-2014 The diesel filter is located immediately behind the coolant reservoir, right in front of the front right shock absorber dome (passenger side); release the filter filling pump and remove the relative support bracket; loosen the filter support clamp and apply paper or rags around the filter in order to absorb any leaking diesel fuel when the pipes are disconnected; then disconnect the pipes by pressing on the relative fixing tabs, extract the filter from its seat, extract the split pin to move the plastic fitting on the new filter if it is not already present and proceed backwards to install it. Once secured in place and piping connected, use the hand pump to fill the filter before starting the engine.
Posted on 12 August 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |