Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Nissan X-Trail

Model: Nissan X Trail T32, MK 3 - Years 2014-2023
Part:

In today's video, see how to handle the tyre warning light activation on the Nissan X-Trail. First, check the pressure of all four tyres and, if necessary, inflate any under-inflated tyres. Once done, proceed to check the onboard computer and reset the warning light. Navigate through the onboard computer using the buttons on the steering wheel until you find the corresponding parameter. Confirm that you want to perform the operation, and you're finished. The vehicle will then store the new pressure.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Nissan X-Trail
How to Reset the Tyre Pressure Light on the Nissan X-Trail
Nissan X Trail (2014-2023 / T32, MK 3) .. to reset the tyre pressure light on the Nissan X-Trail; before recalibrating the TPMS sensors, ensure all four tyres are at the correct pressure. So,.. …
How to reset the tire pressure sensor on the Nissan X-Trail
How to reset the tire pressure sensor on the Nissan X-Trail
Nissan X Trail (2014-2023 / T32, MK 3) .. monitoring system (TPMS) light on the Nissan X-Trail; before performing the reset, it is necessary that all four tires are at the correct pressure... …
How to Reset the Tyre Warning Light on the Nissan X-Trail?
How to Reset the Tyre Warning Light on the Nissan X-Trail?
Nissan X Trail (2014-2023 / T32, MK 3) .. low tyre pressure warning light on the Nissan X-Trail. This is a straightforward and quick operation to perform after restoring the correct pressure.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos